Cemaqua 12 kg dark gray

Cemaqua 12 kg dark gray

 

129,00 € tax incl.

Cemaqua is intended for the waterproofing of ponds, drinking water tanks, swimming pools etc.

The product is a mixture based on hydraulic binders, very pure silica sand, and specific additives.

CemAcryl (included in the bucket) is an acrylic emulsion that increases the elasticity and adhesion of the mixture.

This additive is neither toxic nor corrosive.

Consumption: 2.5 to 3.5 kg of powder / m2 to be applied in two coats.

Preparation of the support: remove any degraded and non-adherent parts to return to a healthy support.

Mixing: mix 25 kg of Cemaqua with 1 liter of CemAcryl (1 vial) and 4 l of water or 12 Kg of Cemaqua with 500 ml of CemAcryl (1 vial) with 2 liters of water.

Mix the product with a mixer until a creamy consistency is obtained.

The temperature during application and the following 24 hours must be greater than 5 ° C.

On a pre-moistened surface, apply CemAqua to the brush in two layers (at least 2.5 kg powder / m2).

At least 12 hours later, apply the second coat to the brush or by spraying.

There is no maximum delay between 2 layers but always ensure that the layer before application is clean: otherwise, pressure cleaning is possible.

Do not work in the rain.

Clean the tool with water.

Storage: Store in a dry place in a dry place.

Storage: maximum 24 months.

Cemaqua is an Aquaticscience product.

Related Products

Revêtement étanche facile à appliquer. Pour réservoirs d'eau potable, bassins, piscines etc.  

235,00 €

Applicator for Cemaqua  

21,00 €

Top