This product is no longer in stock
Drum filter Red Label 100 / 200 XL
The filter consists mainly of a tank in which are housed two rotating drums: these drum are coated with a filter membrane of 70 microns (0.07 mm) on its periphery.
Dirty water from the pond is directed into the drums and, to leave the filter, the water must pass through the filter membrane.
The water in the pool, which is free of particles, comes out of the filter and is directed towards biological filtration.
As the dirty water passes through the drums, the particles are deposited by obstructing the small holes in the membrane, which becomes clogged progressively.
The passage of the water is braked, which causes a difference in level between the downstream and the upstream of the sieve.
At this time, the detection system starts a drum cleaning cycle. From this moment, the drums rotate very slowly and the nozzles arranged on the upper part (outer side of each drum) project jets of water on the filter membrane: under the pressure of water, the smallest dirt is expelled from the filter membrane.
This dirt is collected in a gutter and directed to the sewer. The upstream / downstream water level is restored until the next cycle.
This cleaning is minimalist type: it intervenes only when it is necessary.
They are numerous and the first is obvious: good filtration is based on the principle of removing a maximum of particles as quickly as possible and extracting them from the pond water so that they can no longer harm.
A "normal" filter can only retain what it can ... and the waste that it retains is degraded in the water. With a drum, this is not the case, the biological filtration is less solicited, which in many cases allows to reduce its volume.
Second big advantage: provided you have a reasonable UV power, the water is clear all year round. Without problems!
Third advantage: completed the chore cleaning of the prefilter grid or brushes, a drum filter is self-cleaning. Let's be honest, this filter still requires a minimum of attention because it is a machine, and therefore some minor interventions are expected, but absolutely nothing binding.
Finally, each brand, each model has its particularities: it's up to you to determine the exact type of filter you need.
Pumping or gravity mode, stainless steel or polypropylene, with or without biological filter? These are the first criteria of choice but the most important is its size. Remember that a filter is never too big: the rinsing frequency will be comfortable (3 to 4 rinses per hour in summer for a dozen per day in winter).
On the other hand, a filter that is too small will consume more water because it will have to rinse more often. We are at your disposal to guide you in your choice.
> a model with two drums for XXL basins!
> prices among the most affordable of the market.
> well-designed standard control: integrates safety with cover sensor, internal rinsing pump, pump-basin protection, sockets and plugs for fast and trouble-free Plug & Play installation.
> evolutionary, the range has biological filters of all kinds to complete this mechanical filter.
|Mode||Gravitaire - Pompage|
|Dimensions L x l x H||mm||1580 x 1576 x 785|
|Tambour D x L||mm||2 x 650 x 800|
|Entrée||mm||11 x 110|
|Sortie||mm||6 x 110|
|Sortie eaux usées||mm||2 x 110|
|Débit max||m3 / heure||180|
|Tension nominale||V||230 V / 50 Hz|
|Puissance pompe de rinçage||Watt||900|
|Inclus||Régulation affichage digital|
|Dimensions L x l x H||1210 x 850 x 780 mm|
|Dimension du tambour D x L||650 x 800 mm|
|Débit maxi||80 m3 / heure|
|Nombre d'entrées||6 x 110 mm|
|Nombre de sortie||4 x 110 mm|
|Modèles||Oui, au choix|
|Modèle pompage||Oui, au choix|
|Pompe pression interne||Inclus|