Red Dragon 3 pump

New generation of regulated circulation pumps with electronically commutated motor.

Very economical pump!

1 216,00 € tax incl.

Red Dragon ® 3 Speedy pump with AKB anti-limescale bypass and 10V connection.

The RD 3 pump is suitable for fresh water, brackish water, salt water and for pumping other non-aggressive waters. The pump is not suitable for water containing particles larger than 0.8 mm. Ideally, it will be placed to suck water after a drum filter.

All Red Dragon pumps are made in Germany. Die casting tools were made in Germany. The diecast parts come from German production. Assembly, stator casting, inspection and final testing of Red Dragon pumps are performed in Germany. All essential parts of these pumps are sourced from European countries

The titanium parts are made of pure grade 2 saltwater resistant titanium. All plastic parts are ozone and UV resistant. The wiring is salt water resistant.

The stator housing, raw mantle and bearing rings are made of salt water resistant, grade 2 titanium.

The most common use case for RD 3 pumps is in the context of pond or swimming pool aquarium filtration systems and/or to supply a stream or waterfall.

The pump is not self-priming, however it can be used above the water surface but only in combination with a valve. In this case, the pump must be filled with water before it is put into operation.

The ideal use for this pump is suction after a drum filter. Clean water in this case is defined as water that does not contain solid particles that could damage the bearings. The warranty is excluded in the event of damage caused by these pollutants.

The pump should ideally be placed below the water level. It can be placed submerged or out of water (dry).

Advantage

The pump is designed to save energy!

M6 grade 2 titanium screws resistant to salt water

Saltwater resistant parabolic rubber feet for acoustic decoupling

Extremely quiet brushless DC power pump with power electronics.

Highly efficient technology "Made in Germany"

Input and output complete with DIN connection, compact dimensions

High performance ceramic bearings and hollow shaft for bypass purge in rotor housing

Only salt water resistant pump with titanium rotor, titanium stator and shriveled bearings

Easy to use and maintain. Low risk of calcification thanks to polished titanium parts and mandatory purging

Heavy and solid construction against vibrations and oscillations

CE conformity, developed and built according to VDE guidelines

CHARACTERISTICS

Six models to choose from, to be selected from the menu:

Red Dragon® 3 Speedy FLOW 100 Watt / 12.0m³

Red Dragon® 3 Speedy FLOW 150 Watt / 18.0m³

Red Dragon® 3 Speedy FLOW 230 Watt / 24.0m³

Red Dragon® 3 Speedy PRESSURE 100 Watt / 9.0m³

Red Dragon® 3 Speedy PRESSURE 150 Watt / 17.0m³

Red Dragon® 3 Speedy PRESSURE 230 Watt / 19.0m³

Modèle Débit max  l H. max - m P. max. - Watt Raccords - mm Dimensions - mm Poids - kg
Flow 100  12000 5,25 100 50 / 40  260 x 130 x 210 3,5 + 1,1
Flow 150 18000 5,75 150 50 / 40 290 x 130 x 210 3,5 + 1,2
Flow 230 24000 6,75 230 63 / 50 295 x 130 x 220 3,5 + 1,2
Pression 100 9000 6,00 100 50 / 32 235 x 130 x 190 3,6 + 1,1
Pression 150 17000 6,35 150 50 / 40 290 x 130 x 210  3,5 + 1,2
Pression 230 19000 8,85 230 63 / 40 295 x 130 x 220 3,5 + 1,2

*

Weight: pump weight + controller weight

Top