Primer G4

Adhesion base for polyester sealing.

Allows total cohesion of the polyester coating to the structure as well as protection against moisture.

The polymerization does not require a hardener, it is triggered by the humidity of the support and the air.

The application is done by roller and brush.

After application of the G4, wait at least 1 hour before the use of the polyester: this allows evaporation of the solvents. Otherwise, the risk of bubbles is possible.

After application of the G4, the polyester has to be placed within a maximum of 4 to 5 hours: after this period, the adhesion of the polyester resin is no longer optimal.

Average consumption: 0.25 liter / m2 depending on the porosity of the substrate.

Drying time: 30 min. At 5 hours according to ambient temperature.

Package of 1, 5 or 10 liters of your choice.