Description
Disinfection of water with a minimum of salt.
The combination of hydrolysis and electrolysis with low salinity results in maximum disinfection.
Purifies water with its own H and O components, with a minimal amount of chlorine.
Minimal chlorine production.
Disinfection more effective than chlorine.
Only 1.5 grams of salt per liter of water.
Water is composed of two parts of hydrogen and one part of oxygen (H2O). At the root, the word "hydrolysis" means decomposition by reaction with water. The hydrolysis process generates hydrogen and oxygen by means of electricity and water.
When an electric current passes through the water, it breaks the chemical bonds, the negative charges or oxygen ions migrate to the positive electrode (anode) and the positively charged hydrogen ions are attracted to the negative electrode (cathode) . The following decomposition reaction occurs:
Electric energy + 2H2O -> 2H2 + O2
As a result, this produces an additional negative element because there is more electron (electrical energy) in the combination than protons. There is now only one negatively charged hydroxide, known as the hydroxyl ion (OH-).
Various side reactions occur during hydrolysis which also produce ionic species with oxidizing and disinfecting activity, such as ozone (O3), monoatomic oxygen (O1) and hydrogen peroxide (H2O2).
The circuits of our electronics transform the current (220 V, 50 Hz) into a direct current low voltage and amperage high. This current is fed by special titanium electrodes that are activated on the surface with noble metals, the electrodes are immersed in water as it flows through a specific device.
The surfaces of these insoluble electrodes generate a combination of the most powerful oxidizing agents available for water disinfection, eliminating the need for chemicals.
If a small amount of salt is incorporated in the treatment (1 to 2 g of salt per liter of water), either to fill a lack of conductivity or to generate a tangible residual level, the system will also generate a level of chlorine residual by low salt electrolysis.
The products are generated, act, decompose and are then regenerated. The residual disinfectant produced by electrolysis does not cause any adverse effect on the eyes, skin or health of the swimmers.
There is no need to worry about insufficient salt in the water because the system would continue to disinfest
This controller can be equipped with four additional optional equipment.
TA154 - pH option with standard sensor for pH control (dosing pump not included).
TA148 - pH option with glass sensor for pH control (dosing pump not included).
TA156 - Redox option with standard sensor for disinfection control (dosing pump not included).
TA149 - Redox option with glass sensor for disinfection control (dosing pump not included).
TA160 - Dosing pump for pH control.
English
Français
